Specifications

Lower Frame

Vertical leg = 3.5 inches -- 56 inches long

Horizontal leg = 2.5 inches -- 56 inches long

Steel Thickness = 1/4 inch (.250)

Cross Members = 1 inch x 1 inch square-- 48 inches long Bolted to main lower frames

Bearings = 14 Roller Bearings - sealed -

Slide Stops = 2 - 1/8 inch thick Steel welded to main left frame

 

Upper Slide Frame

Main channels = 1 inches wide x 2 inches high x 3/16 inch thick -- 60 inches long

Cross members = 3 - 1-1/4 inch x 1-1/4 inch x 1/8 inch thick steel angles -- 45 inches long

Cross member mountings = 6 - 1/8 inch thick steel angles welded to main channels

Release rod = 1/4 inch diameter steel rod -- spring actuated

Release handle = Chrome plated cast metal

Slide Stops = 1/4 inch thick steel plates welded to main channels -- rubber shock pads attached

 

Bolts

4 pieces 3/8 inch x 1-1/4 inches long (lower cross members to main lower frames)

6 pieces 1/4 inch x 1-1/4 inch long carriage bolts (secure plywood to upper slide and cross members)

14 pieces 3/8 inch x 1-1/4 inches long (bearing bolts pre-installed)

1 piece 1/4 inch x 2 inches long carriage bolt (slide stop on open)

 

Overall size

Closed = 60 inches long x 47-1/2 inches wide x 4-1/2 inches high with storage for panels underneath

Open = ~ 96 inches

Upper Slide extends ~ 40 inches

 

Payload Rating

800 pounds (Evenly Distributed)

 

Weight

~ 96 pounds ( steel only-no plywood)

Finish

High Gloss Black